1-channel aspirating system equipped with a detector, designed for medium-/large-sized applications with sensitivity, configuration and very early alarm detection requirements, such as: DPCs, warehouses, storage rooms, sterile environments, areas with dual flooring, false ceilings, lift / goods lift shafts, electrical and distribution panels, etc. Complete with high sensitivity smoke detector, filter, suction device and flow monitoring system. Commissioning and configuration can be carried out using specific programming SW or via simplified configuration which allows a pre-set design to be loaded using the switching devices inside the suction unit. For pipework planning, the PipeFlow software offers optimised design for any type of installation. LED interface for instant status indication. 3 relay outputs (Alarm, Fault, Configurable). 3 OC outputs (Alarm, Fault, Configurable), where free OC output programming will be the same as the configuration for relay 3. Capacity of the internal log memory up to 430 events, can be expanded to over 16 million using the optional module Art. MCM35 (SD-Card included). Rapid installation with the option of inverting the position of the machine (straight up/upside-down). Power supply 24 Vdc, with the option of a second redundant power supply. Absorption in alarm status 160 mA (@24VDC). Maximum permitted length of the pipe network 200 m with branches. Class A (16 holes), class B (50 holes), class C (50 holes). IP54 protection rating. Operating temperature -20 +60°C. Certified according to EN54-20. Vds, UL and FM certification.